Hydraulic system calculations
A class with identifier http://rds.posccaesar.org/ontology/plm/rdl/PCA_100006265
| Source ontology | norsok-z001 |
| Comment | - The required hydraulic system (network) capacity, and correct design for in-line equipment, such as control valves, hydraulic/pneumatic actuators, etc.
- For liquid systems where water hammering can be an issue, such as fire water and offloading systems, dynamic calculations shall be included as a part of the hydraulic system calculations.
- Firewater:
- Results/evaluation from transient firewater hammer effect for ringmain high points in distribution system shall also be included.
- Piping and nozzle diagrams as well as Commissioning test reports and results shall be included as separate files. Hydraulic system calculation reports and corresponding executable simulation files (preferably embedded in the report). |
| NORSOK Z-001 rationale | For liquid systems such as heating medium, cooling medium, fire water, offloading, loading, hydraulic power systems, drain, etc., hydraulics design shall be documented by hydraulic system calculations demonstrating as a minimum: |
| NORSOK Z-001 interests stakeholder category | process engineering |
| environmental | |
| safety | |
| health | |
| NORSOK Z-001 describes structural element | Gas export and metering |
| Glycol / methanol regeneration | |
| Heating medium | |
| Drilling process | |
| Gas treatment | |
| Subsea installation - maintenance and work over | |
| Sea water | |
| Oily water | |
| Lubrication oil | |
| Chemical injection pipeline | |
| Drilling control and monitoring | |
| Condensate export line | |
| Fire fighting | |
| Gas sweetening | |
| Loading | |
| Open drain | |
| Separation and stabilisation | |
| Ballast water | |
| Jet fuel | |
| Hydraulic power | |
| Water injection | |
| Gas export pipeline | |
| Wellstream pipeline | |
| Crude handling and metering | |
| Gas conditioning | |
| Drilling drain | |
| Fresh water | |
| Drilling | |
| Diesel oil | |
| Fire water | |
| Drilling well control | |
| Oil storage | |
| Cooling medium | |
| Injection water pipeline | |
| Oil export line | |
| Gas injection pipeline | |
| Sewage treatment | |
| Gas compression and re-injection | |
| Riser and well topside | |
| Well and riser subsea | |
| Closed drain | |
| NORSOK Z-001 definition | - The required hydraulic system (network) capacity, and correct design for in-line equipment, such as control valves, hydraulic/pneumatic actuators, etc.
- For liquid systems where water hammering can be an issue, such as fire water and offloading systems, dynamic calculations shall be included as a part of the hydraulic system calculations.
- Firewater:
- Results/evaluation from transient firewater hammer effect for ringmain high points in distribution system shall also be included.
- Piping and nozzle diagrams as well as Commissioning test reports and results shall be included as separate files. Hydraulic system calculation reports and corresponding executable simulation files (preferably embedded in the report). |
| skos:broadMatch | explanatory technical information |
| skos:broader | Calculation |