PCA Reference Data and Services
Toggle Dark/Light/Auto modeToggle Dark/Light/Auto modeToggle Dark/Light/Auto mode
  2. /
  3. Reference Data Library
  4. /
  5. PLM
  6. /
  7. Pipe stress procedure

Pipe stress procedure

A class with identifier http://rds.posccaesar.org/ontology/plm/rdl/PCA_100006364

MetadataThis section provides information about 'PCA_100006364' itself.

Source ontologynorsok-z001
NORSOK Z-001 rationaleThe document shall describe the design data for the pipe stress work, and ensure that all applicable codes, standards, guidelines and regulations that are relevant at the commencement of detail engineering are fulfilled. For modification projects the existing procedure for the plant may be used if this is available.

NOTE: For equipment packages where the amount and size of piping is moderate, or the piping might be mostly for support functions (cooling, lubrication, drain etc.), pipe stress procedure from the manufacturer is not necessary. For large packages with a considerable amount of larger piping, where pipe stress isometrics will be delivered, pipe stress procedure should also be delivered.

NORSOK Z-001 interests stakeholder categorypiping engineering
NORSOK Z-001 describes structural elementEquipment
skos:broadMatchinstructive information
skos:broaderProcedure

ConstraintsThis section lists constraints that members of 'PCA_100006364' shall satisfy.

ContextThis section provides super- and subtypes as well as members of 'PCA_100006364'.

Document