PCA Reference Data and Services
Toggle Dark/Light/Auto modeToggle Dark/Light/Auto modeToggle Dark/Light/Auto mode
  2. /
  3. Reference Data Library
  4. /
  5. PLM
  6. /
  7. General arrangement drawings - Pipeline structures

General arrangement drawings - Pipeline structures

A class with identifier http://rds.posccaesar.org/ontology/plm/rdl/PCA_100006240

MetadataThis section provides information about 'PCA_100006240' itself.

Source ontologynorsok-z001
CommentThese drawings shall contain the following information: - Dimensions - Location and identification of piping and main components - Necessary space for disassembly and maintenance - Location of centre of gravity - Possible thermal expansion. - On the structural steel drawings, critical welds shall be included with a weld identification number serving as a cross-reference to the weld summary index - Obstacles from other disciplines shall be included when relevant - Total weight, wet and dry and in operational condition - Weights, centre of gravity and main dimensions of disassembled units/components over 25 kg. Lifting lugs and runway beam for disassembling and their location shall be shown - Identification and location of all external pipeline connections as well as requirements for flexible connections and acceptable loads and moments. Locations shall be dimensioned, and tolerances shown, if necessary, in separate drawings - Identification and location of all external electrical and control monitoring connections (may be given in separate drawings describing the electrical arrangement and instrumentation) - For pressure equipment: For projects within the EU, Category and Module shall be according to PED (Pressure equipment directive) - Include bolt tension requirements for pressure equipment flanges - identification of lubrication points

Foundation information (such as support frame, support structure) shall include:

  • The outer dimensions and footprint of the support frame or foundation supports
  • The size, grade and location of the foundation bolts and torque where this is necessary
  • Forces and moments transferred to load bearing structures, both under normal operation and extreme conditions
  • Details for adjustment and alignment
  • Details for cut-outs inside outer limit of foundation
  • Details for vibration dampening units (if installed)
NORSOK Z-001 rationaleGeneral arrangement drawings for pipeline structures such as riser bases, pipeline protection structures, tee/wye assemblies, anchor blocks, valve stations, pump stations, pig traps etc.
NORSOK Z-001 interests stakeholder categorypipeline engineering
NORSOK Z-001 describes structural elementEquipment
NORSOK Z-001 definitionThese drawings shall contain the following information: - Dimensions - Location and identification of piping and main components - Necessary space for disassembly and maintenance - Location of centre of gravity - Possible thermal expansion. - On the structural steel drawings, critical welds shall be included with a weld identification number serving as a cross-reference to the weld summary index - Obstacles from other disciplines shall be included when relevant - Total weight, wet and dry and in operational condition - Weights, centre of gravity and main dimensions of disassembled units/components over 25 kg. Lifting lugs and runway beam for disassembling and their location shall be shown - Identification and location of all external pipeline connections as well as requirements for flexible connections and acceptable loads and moments. Locations shall be dimensioned, and tolerances shown, if necessary, in separate drawings - Identification and location of all external electrical and control monitoring connections (may be given in separate drawings describing the electrical arrangement and instrumentation) - For pressure equipment: For projects within the EU, Category and Module shall be according to PED (Pressure equipment directive) - Include bolt tension requirements for pressure equipment flanges - identification of lubrication points

Foundation information (such as support frame, support structure) shall include:

  • The outer dimensions and footprint of the support frame or foundation supports
  • The size, grade and location of the foundation bolts and torque where this is necessary
  • Forces and moments transferred to load bearing structures, both under normal operation and extreme conditions
  • Details for adjustment and alignment
  • Details for cut-outs inside outer limit of foundation
  • Details for vibration dampening units (if installed)
skos:broadMatchconstruction entity information
skos:broaderArrangement Drawing

ConstraintsThis section lists constraints that members of 'PCA_100006240' shall satisfy.

ContextThis section provides super- and subtypes as well as members of 'PCA_100006240'.

Document