PCA Reference Data and Services
Toggle Dark/Light/Auto mode Toggle Dark/Light/Auto mode Toggle Dark/Light/Auto mode

Pipe support drawings

A class with identifier http://rds.posccaesar.org/ontology/plm/rdl/PCA_100006365

MetadataThis section provides information about 'PCA_100006365' itself.

Source ontology norsok-z001
Comment The following information shall be included:n - Dimensioned plan, elevation, sectional and iso views as required;n - Centre of gravity location and coordinates;n - Weight;n - Material identification and description (bill of material);n - Line numbers for all supported lines;n - Reference to stress isometric if relevant;n - Reference to support calculations if relevant;n - Reference to connected pipe support assemblies / spring support assemblies;n - The drawing title shall include the pipe support number.nnNOTE: For equipment packages where the amount and size of piping is moderate, or the piping might be mostly for support functions (cooling, lubrication, drain etc.), pipe support drawings from the manufacturer are not necessary. For large packages with a considerable amount of larger piping, pipe support drawings for the main piping should be delivered. Selection should be done early in the project.
NORSOK Z-001 rationale Detail drawings describing the support installed shall be provided for all pipe supports (pipe support assemblies and spring support assemblies).
NORSOK Z-001 interests stakeholder category piping engineering
NORSOK Z-001 describes structural element Equipment
NORSOK Z-001 definition The following information shall be included:n - Dimensioned plan, elevation, sectional and iso views as required;n - Centre of gravity location and coordinates;n - Weight;n - Material identification and description (bill of material);n - Line numbers for all supported lines;n - Reference to stress isometric if relevant;n - Reference to support calculations if relevant;n - Reference to connected pipe support assemblies / spring support assemblies;n - The drawing title shall include the pipe support number.nnNOTE: For equipment packages where the amount and size of piping is moderate, or the piping might be mostly for support functions (cooling, lubrication, drain etc.), pipe support drawings from the manufacturer are not necessary. For large packages with a considerable amount of larger piping, pipe support drawings for the main piping should be delivered. Selection should be done early in the project.
skos:broadMatch geometrical outline information
geometrical detail information
manufacturing information
assembly information
skos:broader Drawing

ConstraintsThis section lists constraints that members of 'PCA_100006365' shall satisfy.

ContextThis section provides super- and subtypes as well as members of 'PCA_100006365'.