System topology diagrams
A class with identifier http://rds.posccaesar.org/ontology/plm/rdl/PCA_100006482
| Source ontology | norsok-z001 |
| Comment | Typical contents of a detailed topology diagram shall be:
- All related functional units and subunits represented by blocks including unit tag no and description;
- Location of units;
- Interface and network between units shall be indicated;
- Interface from units to other external systems;
- Protocol shall be indicated for serial links and for network connections to external system. By units is meant but not limited to:
|
| NORSOK Z-001 rationale | System topology diagram shall show the structure of systems and subsystems to give a functional understanding. System topology diagram shall as a minimum be produced for the following systems:
If it is not possible to present all detailed information in a system on one topology drawing, the information shall be split in different detail levels as follows:
|
| NORSOK Z-001 interests stakeholder category | instrumentation engineering |
| NORSOK Z-001 describes structural element | Emergency preparedness |
| Compressed air | |
| Flare | |
| Fire and gas detection | |
| Glycol / methanol regeneration | |
| Chemical injection pipeline | |
| Open drain | |
| Closed drain | |
| Lubrication oil | |
| Main power (1.0 kV< u < 6.6 kV) | |
| Oil export line | |
| Chlorination | |
| Gas injection pipeline | |
| Main power (u =or >6.6 kV) | |
| Methanol injection | |
| Diesel oil | |
| Injection water pipeline | |
| Steam | |
| Heating medium | |
| Emergency power (u<1.0 kV) | |
| Chemical injection | |
| Battery and no-break | |
| Oil storage | |
| Fresh water | |
| Hydraulic power | |
| Sewage treatment | |
| Wellstream pipeline | |
| Control | |
| Emergency shutdown and blow down | |
| Jet fuel | |
| Fuel gas | |
| Fire water | |
| Fire fighting | |
| Loading | |
| Cooling medium | |
| Thruster and propulsion | |
| Inert gas | |
| Emergency power (u = or >1.0 kV) | |
| Gas export pipeline | |
| Ballast water | |
| Main power (u = or <1.0 kV) | |
| Condensate export line | |
| Oily water | |
| Sea water | |
| NORSOK Z-001 definition | Typical contents of a detailed topology diagram shall be:
- All related functional units and subunits represented by blocks including unit tag no and description;
- Location of units;
- Interface and network between units shall be indicated;
- Interface from units to other external systems;
- Protocol shall be indicated for serial links and for network connections to external system. By units is meant but not limited to:
|
| skos:broadMatch | system overview information |
| skos:broader | Diagram |