MetadataThis section provides information about 'PCA_100006520' itself.
| Source ontology |
norsok-z001
|
|
Comment |
Drawings of the following are required:
- Detail / cross sectional drawings (details of manual/bare stem valve/actuator/control panel, etc.)
- Arrangement drawings of assemblies (assemblies of valve/gearbox/actuator/control panel, etc.)
Arrangement drawings and detail/cross sectional drawings may be supplied as separate drawings or combined in one drawing. Drawings shall show all components in the same scale.
Detail/cross sectional drawings shall at least include:
- VDS reference (Valves)
- All welds including hard facing and overlaying (Valves)
- Bore (Valves)
- Outline dimensions
- Weight, as built
- Lifting lugs
- Parts list including all parts with functional part description and material standard used (real manufacturer’s part number is not required on the drawings). MDS reference to be included when specified in the requirements
Arrangement drawings of assemblies shall at least include:
- Outline dimensions
- Material selection for adaptor stool, coupling (connection between valve and actuator shafts), actuator/valve connection bolts and valve stem if modified from specified requirement (including CR reference)
- Weight, as built (weights shall be listed separately for valve, actuator, control panel or cabinet and total assembly)
- Principles for assembly (maintenance envelopes)
- All power and signal connection points with entry details
For valves not specified according to TR2000 (e.g. control, choke and safety relief valves), real manufacturer's part number shall be included on the valve drawing or a separate BOM.
|
|
NORSOK Z-001 interests stakeholder category
|
mechanical static engineering
|
|
NORSOK Z-001 definition
|
Drawings of the following are required:
- Detail / cross sectional drawings (details of manual/bare stem valve/actuator/control panel, etc.)
- Arrangement drawings of assemblies (assemblies of valve/gearbox/actuator/control panel, etc.)
Arrangement drawings and detail/cross sectional drawings may be supplied as separate drawings or combined in one drawing. Drawings shall show all components in the same scale.
Detail/cross sectional drawings shall at least include:
- VDS reference (Valves)
- All welds including hard facing and overlaying (Valves)
- Bore (Valves)
- Outline dimensions
- Weight, as built
- Lifting lugs
- Parts list including all parts with functional part description and material standard used (real manufacturer’s part number is not required on the drawings). MDS reference to be included when specified in the requirements
Arrangement drawings of assemblies shall at least include:
- Outline dimensions
- Material selection for adaptor stool, coupling (connection between valve and actuator shafts), actuator/valve connection bolts and valve stem if modified from specified requirement (including CR reference)
- Weight, as built (weights shall be listed separately for valve, actuator, control panel or cabinet and total assembly)
- Principles for assembly (maintenance envelopes)
- All power and signal connection points with entry details
For valves not specified according to TR2000 (e.g. control, choke and safety relief valves), real manufacturer's part number shall be included on the valve drawing or a separate BOM.
|
|
skos:broadMatch
|
manufacturing information
|
|
geometrical detail information
|
|
technical property information
|
|
geometrical outline information
|
|
assembly information
|
|
skos:broader
|
Drawing
|
ConstraintsThis section lists constraints that members of 'PCA_100006520' shall satisfy.
